Pages

Friday, June 18, 2010

Tutorial :: Summer Sunglasses Case


Summer is here!! We need something cute, am I right??
While me and the hubby were out today having breakfast with little Sophia, I complained about how I was getting old and wrinkled from squinting in the sun. All in all this led to a trip over to get some new sunglasses this morning. It was nice to have the hubby there so that he could let me know what looked best on me.

After realizing that they probably wouldn't last long with my clutzy behavior, I decided to make a little case for them. So now Folks I give you my super quick tutorial for the Sunglasses case (terrible pictures I am so so sorry).

SUPPLIES::
Piece of Heavy linen
Main Fabric
Lining Fabric
Button
Elastic Band
Fusible fleece (heavy)
Craft Fuse (fusible)
Heat n bond

Here are the dimensions that you need to Cut::

Main Fabric :: 3.5 x 5: (times 2)
Lining Fabric :: 9" x 5" (times 2); 2.5" x 3" (only 1 piece)
Linen :: 6" x 5" (times 2) ; 2.5" x 3" (only 1 piece)
Fusible Heavy Fleece :: 9" x 5" (times 2)
Craft Fuse :: 2.5" x 3" (only 1 piece)


After you have cut out all of your pieces, line up your main piece and your linen piece to look like the set on the right of the photo below. You will fold the main piece over to meet the edge of the linen Right sides together as shown on the left of the photo below. Sew across the top a 1/4 inch seam


Do this two both sets, then open them up and press the seams open to look like the photo below



After you have pressed the seams open iron the combined piece to the fusible fleece. Be sure to follow the directions on your fleece as to what side applies to the fabric. This will prevent a sticky mess.

After you have adhered both pieces to the fleece now is the time to add your stitch detail.
I put a few back and forth lines where the seam meets but you can do whatever you would like, or nothing at all. Would also be a great place for a decorative stitch.

Decide what piece will be the front and what piece will be the back . Take your front piece and find the center lengthwise. Where your seams meet add your button to the center using your machine. If you need help on how to sew a button using just your sewing machine, please see my previous tutorial here.



Set the main pieces aside for now and grab the four smallest pieces. You should have four pieces each 2.5"x3" one in linen, one in your lining fabric, and two in the craft fuse. Face the shiny side up on the craft fuse and add your lining fabric on top of it with the right side facing up. Then iron, the craft fuse is fusible and will adhere to the fabric giving it stability. Do the same step with the linen and the other piece of craft fuse.

Next pin your elastic band to the top of the short side. See photo below. You need to sew a back and forth tight basting stitch to keep this band in place. Make sure that you attach it just like the picture with the part you will be wrapping around your button facing inward.


Now put the linen piece and the lining piece with the elastic band together right side facing each other, and fused side facing out.

See photo below; Start Where the foot is placed in the picture, Sew three sides only from black dot to dot in the picture leaving the top without the elastic band open



Your piece will look like this. Go ahead and clip the corners as you will be flipping this right side out and it could give you less bulk by clipping them.


After you have flipped this piece right side out again, iron open and then top stitch around the edges to give it a nice clean look.
 Now take the main piece that you have designated to be the back of the case and find the center. Put the piece you just created with the elastic band in the top center of your back piece like shown in the photo below. Apply a tight basting stitch to keep in place.


Now on the front piece, If you are wanting to add the applique detail as well. I fussy cut my picture, applied a heat and bond to the back, ironed it about one inch from each side then stitched it down with a simple straight stitch. Just make sure you add it to the same piece as the button.
Now this part is done.

Put the front piece and the back piece together right sides facing each other. the fleece side will be facing out towards you.

Now stitch from the left side to the right side all the way around leaving the top open where the flap is attached.

Now do the same with the lining only at the bottom leave a gap about 3 inches wide. So to explain further sew from the top right to the bottom. Then from the bottom right corner in about one inch then back stitch, Lift your needle and move it about one inch from the other side and continue stitching. Back stitch then continue towards the top left side leaving the very top open .

Now that I have confused you just see the picture below. In between the black dots there are no stitches. That part is left open for flipping right side out.

Now take the lining piece and flip it right side out.


You should now have two pieces that look just like this. (see photo below)


Now this might get a little tricky so pay close attention . Open up both pieces at the top. Take your lining piece and insert into the main piece. Your main piece will still be shown right sides in and your lining pieces with right sides out (this is correct)
Pin the seams together matching up the edges of the fabric.
Now sew a 1/4 in seam around the top connecting the two pieces.


Now reach in the tube and pull out the lining. The lining will now show inside out. The end of the lining piece will have the gap you left open for flipping.  reach your hand through the hole all the way to the bottom of the main piece. Grab the bottom and pull upwards towards the opening.



Now your piece should look like the photo below.

Make sure that you use a ruler or a pencil of some sort to push out all of your corners.

** Tip: I like to round my corners when sewing instead of just pointing them, I think it looks cleaner in the end.


Take the end of the lining and match up the seams sewing along the edge to close the gap (this is not a 1/4 inch seam it's as close as you can get it to the edge catching all layers)


Now push the lining inside of the main print making sure that corners meet and the lining fits snugly. Then you can iron the seam and top stitch it or leave it be. After putting the lining in your flap that was made will also pop out and come over the top to enclose your sunglasses in the case with a button closure.


That's it, YOUR FINISHED. Now go sport your sunglasses in some serious style!!



This tutorial is for personal use only, please do not sell items made from my personal tutorials.
Thank you

If you make one I would love to see it. Please post your photos in my flickr sharing pool here
** ADDED**
For those of you who are curious . I get my linen here The one I like most is the Judy linen.
I get my buttons here, and I get most of my interfacing at my local Joann's. Craft fuse has the number 808 on the bolt.

35 comments:

  1. Ooh I have the perfect fabric to try this with! My little bit of Aqua Heather Ross Seahorses :)

    ReplyDelete
  2. what a wonderful tutorial!! LOVE it!!

    ReplyDelete
  3. Very cool ;) Love the darling fabrics you used!

    ReplyDelete
  4. wonderful tutorial - these are super cute and totally useful! many thanks!

    ReplyDelete
  5. Thanks for the tutorial....Love it...

    ReplyDelete
  6. You rock, this is great. The sunglasses look cute, that hubby has good taste.

    ReplyDelete
  7. I love this idea, I must do this before I buy a new pair of sunglasses this summer because mine just don't make it long in my purse!

    ReplyDelete
  8. I love this tute Terri! What kind of linen are you using? I need to find a good heavy weight one.

    ReplyDelete
  9. Ack! Cute, Cute Cute!! I'm going to make one for my rotary cutter - thanks for sharing your method so I can relax my brain finally.

    ReplyDelete
  10. Your cases look amazing, thanks for sharing a great tutorial!

    ReplyDelete
  11. What a fantastic tutorial, thanks for sharing, this may be in my very near future :)

    ReplyDelete
  12. so cute cant wait to try this.

    ReplyDelete
  13. Definately going to give this a go!
    Angela
    sewloquacious.blogspot.com

    ReplyDelete
  14. Hi there!amazing tutorial.I'm going to make one for my father's reading glasses. the technique is brilliant.thks a ton.

    ReplyDelete
  15. My glasses always get scratched in my purse. Can't wait to make me one of these.

    ReplyDelete
  16. excellent tutorial, didnt even take that long to make my own!!

    I will be linking to this post when I post mine on my blog!!

    ReplyDelete
  17. Thanks! i just made one to match my purse, Great instructions!

    ReplyDelete
  18. Oh that is really awesome..you know the art of making many things out of nothing.

    ReplyDelete
  19. Really like the post and the effort is appreciating.....

    ReplyDelete
  20. great tutorial, I've been looking for how to do this for a while now, customized sunglasses case here I come!

    ReplyDelete
  21. Thanks for sharing! Hey I really wanted to know where you got your linen and the link wasn't working When you have some time please drop me a name or link. My e-mail is c_r_photo@yahoo.com. Thanks so much. I pinned this to make before I get my next pair of sunglasses. Doreen

    ReplyDelete
  22. Thanks for the great tutorial! Whipped one up today in a few hours. Gotta protect those $0.97 sunglasses :)

    ReplyDelete
  23. Thanks for sharing this easy tutorial Made one for my friend. Please see the link to have a look http://charmingstitches.blogspot.in/2012/05/back-with-bag.html

    ReplyDelete
  24. I had just made a beach bag/towel for my granddaughter and bought some sunglasses to go with it. There was just enough of the bag fabric left to make this case for them. Great instructions..and the photos were fine! My granddaughter will be thrilled. Thanks!!!

    ReplyDelete
  25. Very cool. Thanks for the tutorial.

    ReplyDelete
  26. Thanks for the tutorial! I just made one for a friend,

    ReplyDelete
  27. Great tutorial with lots of detail and photos-I'm a visual person. I have made several of these, but I like your slightly different take on the insertion of the lining. Usually I turn the cover right side out and insert the lining then stitch along the top. I like your techniqe better, expecially when there is a tab added. Nice job!

    ReplyDelete
  28. great tutorial I tried to click on link for linen and it appears not to be working....is there a website I can key in so I can view ?

    ReplyDelete
  29. i love this tutorial, I have the rubber like yours and do want to make one for my classes,,thanks so much...

    ReplyDelete
  30. Terri
    I just saw your tutorial and printed out a copy (for my own use). I'm in an online swap and I wanted to make some of these for the swap. You have explained things very well and I LOVE all the pictures...it makes it so easy to follow along. I'm like Anonymous on July 1st, I'm a visual learner and pics makes it very easy. Thanks so much! I hope mine turn out as pretty as yours.

    ReplyDelete
  31. Great !!!!! This is what I am doing today. Thanks it looks stunning.

    ReplyDelete

Thank you for stopping by. I appreciate that you took a minute to read my post.
Please share what you thought about it with a comment.